![]() Mosquito Magnet Independence Owner's Manualįollow these simple storage steps to ensure the longevity of your Mosquito Magnet and maximize mosquito trap performance. (Independence Mosquito Magnet model)Įlectrical fault. After several repeated unsuccessful attempts, replace with 4 new C batteries.Ensure that the battery cage connector is properly installed.Make sure the 4 C batteries are properly installed and fresh.If a fully charged battery indicates low battery voltage during the cycle, recharge, or replace the battery.Check battery connection make sure it is fully inserted and locked.The charger LED will be green when the battery is fully charged. Charge the battery before the first use and at the beginning of each season.If the code continues call customer care at: 1-80. High-temperature.Turn off the trap and allow it to cool down for an hour then restart it. Keep your Mosquito Magnet in constant operation 24 hours/day, 7 days/week for 4 weeks to interrupt the mosquito breeding cycle and get rid of mosquitoes.ĬounterFlow may be disrupted.Air flow may be restricted. Mosquito Magnet Placement Articleīiting insects reproductive cycles have not been broken yet. Verify that temperature is consistently above 50 degrees F (10 degrees C) before starting mosquito traps. Replace protective cap, and proceed with normal start-up of your Mosquito Magnet mosquito trap.Remember to keep the Quick Clear adapter for future use Unscrew the Quick Clear cartridge first, then unscrew Quick Clear adapter and discard the spent Quick Clear cartridge.To start the cleaning process, while holding Quick Clear adapter in place, unscrew the Quick Clear cartridge 1/4 turn only. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |